Cookie Img
Send Inquiry Send SMS
Home » Products » Geocomposite » Geocomposite


Send Inquiry
Product Code : VT-1
Product Description

For the diverse requirements of our valued clients, we are engaged in manufacturing and supplying an exclusive collection of Geocomposites. Which are a combination of any of Geotextiles, Geogrids/Geonets, Geomembranes. The materials and manufacturing methods vary with the composite Geosynthetics used. These are extensively used for geosynthetic applications.
VT GC Fin drains shall be made of light weight, three dimensional high compressive strength polyethylene core black in color ; they are resistant to chemical and biological conditions normally occurring in soil. Moreover they are treated with special additives to resist UV degradation. ; and heat bonded or needle punched polypropylene / polyester geotextile provided on one side or both sides of the core as per the requirements. The inner strands, thicker and heavier, provide high compressive resistance and transmissivity. The intersecting strands form overlaid sets of continuous deep channels which provide high flow capacity. These Findrain are used in Roads RE Wall, waste disposal and civil engineering projects, where a high hydraulic flow capacity is required.
Geotextile used in a drainage composite shall meet the requirements as specified in Table 700-9.(of morth) The properties of the core material shall meet the requirements as indicated in Table 700-10 (of morth).
Typical applications Site : Roads RE Wall , Levelling and mechanical protection of the geomembrane; drainage of the accidental leaks below primary ; leachate and rain water collection above primary geomembrane; mechanical protection of the geomembranes when in contact with waste-materials and/or soil; drainage of liquids and gases present in the soil above and/or below the capping geomembrane.


Geotextile Specifications for VT GC Fin drains


In-situ soil passing Permittivity, per sec ASTM D Maximum Apparent Opening Size, mm as
0.075 mm sieve(%) 4491/ IS 14324 : 1995 per ASTM D4751/ IS 14294 : 1995
< 15 0.5 0.43
15 to 50 0.2 0.25
> 50 0.1 0.22


Specification for Fin drain :


Test method


Minimum average Roll value





Tensile strength

EN ISO 10319







CBR Puncture Resistance

EN ISO 12236







Mass per unit area

EN ISO 9864







Thickness of Composite

EN ISO 9863







In-plane permeability




(Hydraulic Gradient, i=1 at 100 kPa pressure)

EN ISO 12958







Hydraulic Gradient, i=1 at 200 kPa pressure

EN ISO 12958







Virendera Textiles

Virendera Textiles
An ISO 9001:2008 Certified Company
B-51, Sector - 10, Noida - 201301, Uttar Pradesh, India
Phone :+917042507465
Fax :91-120-4236853
Mr. Amit Agarwal (Managing Director)
Mobile :+917042507465

Product Showcase
Send Inquiry Send SMS